QuickFRAME Info


Are you frustrated with your current method of stall curtain frame construction?
Say goodbye to duct tape, splintered lumber and weak framework.
QuickFRAME brackets make framework construction a breeze!
 
Features of the QuickFRAME bracket system:
  • Our patent pending design provides full access to lumber for easy stapling.
  • Our brackets do not hide the lumber.
  • Corners of our brackets are completely open, allowing lumber to pass through for easy connectivity.
  • Create strong framework fast!  Reduce set-up and tear-down time by 50% or more!
  • Available for 1x4 lumber or 1x2 lumber (1x2 brackets coming soon)
  • Strong, lightweight and compact design
  • Constructed of 6000 series aluminum for maximum strength and durability
  • Limited lifetime warranty against breakage
  • Made in the USA

 90 Degree Corner Bracket (1)

The 90 Degree Corner Bracket is used to create an end corner in your frame structure.  See item 1 in the illustration to see the many locations this bracket is used.  It can also be used to create a sign structure across the aisleway, also shown in the illustration. 



 T Bracket (2)

The T Bracket is used to create a junction between horizontal and vertical lumber in your frame structure.  The T allows lumber to pass completely through the bracket, or three individual pieces of lumber can be inserted into the bracket.  See item 2 in the illustration to see the location of this bracket.



 Upper Corner Post Bracket (3)  

The Upper Corner Post Bracket is used in conjunction with the Lower Corner Post Bracket to create an outside corner in your frame structure.  See item 3 in the illustration to see the use of this bracket.




 Lower Corner Post Bracket (4)

The Lower Corner Post Bracket is used in conjunction with the Upper Corner Post Bracket to create an outside corner in your frame structure.  See item 4 in the illustration to see the use of this bracket.




 Add-A-Leg Bracket (5)

The Add-A-Leg Bracket many times is used in place of a T Bracket.  The difference is that a T Bracket must be installed with the main frame structure.  The Add-A-Leg Bracket can be added after the main frame structure is complete.  It is ideal for creating a zipper door opening.  It can also be used to create vertical or horizontal beams to hang pictures or ribbons, etc.  See item 5 in the illustration for the location of this bracket.


 Coupler Bracket (6)

Sometimes you may need a longer piece of lumber than you have on hand, but you don't want to make a trip to the lumber yard.  The Coupler is the ideal solution.  Quickly make an 8' piece of lumber out of two 4' pieces, or a 10' piece from an 8' and 2' piece.  The Coupler creates a very strong joint and it can be used anywhere in your frame structure, saving time and lumber.  See item 6 in the illustration to see this bracket in use.




The photo above shows the actual brackets manufactured at our facility.  All of our brackets are made of 6000 series aluminum and TIG welded to provide maximum strength and durability.  As part of the manufacturing process all sharp edges are deburred and the brackets are given a burnished finish.  Each bracket purchased includes a limited lifetime warranty.